Porcelain A30 Insulators

PORCELAIN A30 INSULATORS IN STOCK AND AVAILABLE FOR IMMEDIATE SHIPMENT.

A30 Bus Insulators

The porcelain A30 bus insulators supplied by Meister International are designed for applications that have high mechanical stresses, and are cantilever tested to guarantee that they meet industry standards. This ensures high quality, dependability, and safety, plus our high standards keep your production process running smoothly.

A30 Porcelain Bus Insulators

ORDER OUR A30 BUS INSULATORS ONLINE NOW OR REQUEST A QUOTE

OUR A30 PORCELAIN BUS INSULATORS ARE IN STOCK AND AVAILABLE FOR IMMEDIATE SHIPMENT

The porcelain A30 bus insulators supplied by Meister International are designed for applications that have high mechanical stresses, and are cantilever tested to guarantee that they meet industry standards. This ensures high quality, dependability, and safety, plus our high standards keep your production process running smoothly.

Meister International stocks A30 porcelain bus insulators for the following voltage classes:
• 5kv
• 7.2kv
• 15kv/95kv BIL
• 15kv/110kv BIL
• 23kv/150kv BIL
• 34.5kv/200kv BIL

Porcelain A30 bus insulators (also referred to as bus bar insulators and bus supports) are utilized for high voltage applications where reliability and maximum “uptime” is paramount. Switchgear, power transformer, and bus-duct manufacturers use porcelain A30 bus insulators where high cantilever strength is necessary. Porcelain A30 bus insulators have a six-inch (6”) diameter to meet higher mechanical requirements. The high cantilever strength ratings meet the demands of industrial and utility customers around the world.

Porcelain A30 bus insulators are typically used to support long and short copper bus-bars. Ease of installation is key and Meister International supplies porcelain A30 bus insulators with hot-dipped galvanized inserts, further reducing the amount of potential downtime. The porcelain A30 bus insulators supplied by Meister International adhere to both the mechanical and electrical requirements of IEEE, IEC, NEMA and ANSI Standards. Testing is also performed in accordance with the applicable industry standards.

The glaze coating on the exterior of the porcelain A30 bus insulators supplied by Meister International keeps dirt and pollutants from adhering to the insulator, making maintenance of porcelain A30 bus insulators unnecessary. The inserts are made from metals that will not oxidize or otherwise deteriorate, and are ideal for supporting copper and aluminum bus-bars.

Meister International maintains an extensive stock of industry standard porcelain A30 bus insulators to help customers avoid long lead times. Due to the high quality of porcelain A30 bus insulators, production time can be lengthy, but Meister International offers stocking agreements that enable your production process to run without interruptions. Typically, porcelain A30 bus insulators can be shipped within 24 hours from receipt of order.

For additional information on Meister International’s products, including A30 bus insulators and bus bar insulators, please contact us by phone at 513.923.2712, or via email by clicking here.


Manufacturers, packagers, and distributors of switchgear, power transformers, generators and bus-duct consistently choose porcelain insulators over epoxy and silicone designs due to their durability. If you have ever experienced downtime due to a field failure of an ‘epoxy insulator’, the outrageously high cost of downtime could have been avoided by using porcelain insulators. Utility engineers and consultants continue to specify porcelain insulators for their key switchyard projects because of their superior reliability.

The design of the porcelain insulators distributed by Meister International comply with the mechanical and electrical requirements of IEEE, IEC, NEMA and ANSI Standards. Testing is also performed in accordance with the applicable industry standards. Custom porcelain insulators can also designed and manufactured for customer specific applications and requirements.

Maintenance of porcelain insulators is really not required as the glaze coating on the exterior of the insulator keeps dirt and pollutants from adhering to the porcelain insulator. The metal fittings used in the manufacture of the porcelain insulators distributed by Meister International are made from metals that will not deteriorate and are ideal for supporting copper and aluminum busbars.

While the manufacturing of porcelain insulators does take time, Meister International helps customers avoid long lead times by stocking industry standard porcelain insulators. Stocking agreements are offered so that your production process can run without interruption. We put our customers first and always work to exceed our customers’ expectations.



NATIONAL ASSOCIATION OF ELECTRICAL DISTRIBUTORS
NEMA
EASA
BBB